The output of the Joker can be compared to a 750/1000 Watt quartz fixture, but with a power draw less than 3 Amps. It has become a standard for small interiors, interviews, documentaries and car shots.
The PAR type design is preferred for its spot to flood ration (80 to 1), compactness (no focusing), ease of use and efficiency through diffusing material. The popular set of four lenses and barndoor will help to control the beam patterns from 5 degrees to 65 degrees. Optical Beamer can be easily removed, which allows light to fill Lantern or any size Lightbank evenly.
Head: 5" x 5" x 5" ; 4 lbs
Head: Ballast: 5" x 5" x 5" ; 4 lbs.
Head: Kit: 10" x 10" x 10" ; 20 lbs.
| Head | Die Cast Aluminum |
| Ballast | Electronic square wave, flicker free AC Input; 90-265V, 50/60Hz. Convection Cooled. |
| Lamp | 200W MSR/HMI, 5600K, Single Ended |
| Cable | 9' Head Cable; 25' Extension |
| Accessory Size | 5" |
| Lens Size | PAR36 |
| 1 x UO200B1 | Joker 200 Head w/9ft. Cable, clear glass beaker |
| 1 x A0900BMR | Beamer Optical accessory |
| 1 x L0200LCLD | 200W LCL Lamp, 5600K, Evolution |
| 1 x B0200EVO | Electronic Power Supply, 110/240V, 50/60Hz |
| 1 x A0200BD | Four leaf Barndoor |
| 1 x A0200LS | 200W Joker Lens Set w/Bag |
| 1 x A0200LP | Litepac Soft Case - Small |
The Joker2 400W is 25% brighter than it's original Joker counterpart. Drawing less than 4 amps on 120V, the new Joker2 400 is one of the smallest, most efficient light sources on the market today.
Like all Jokers, the 400 can be used with it's Parabolic Beamer and lens set, or without for use in a myriad of soft light accessories.
Simple use of our custom Bug-A-Beam Adapter gives you a punchy ellipsoidal follow spot.
The new hi-speed ballast includes dimming, 300/1000Hz Frequency selection, and wireless DMX receiver inside.
Head: 10" x 7" x 10" ; 5.5 lbs.
Head: Ballast: 12" x 8" x 3" ; 9 lbs.
Head: Kit: 17" x 12" x 19" ; 40 lbs.
| Head | Die Cast Aluminum |
| Ballast | Electronic square wave, flicker free AC Input; 90-265V, 50/60Hz. Convection Cooled. High Speed 1000Hz; Wireless DMX enabled; <4 Amps @ 120V |
| Lamp | 400W CSR/HMI, 5600K, Single Ended |
| Cable | 9' Head Cable; 25' Extension |
| Accessory Size | 6 5/8" |
| Lens | Medium, Wide, Super, Frosted Fresnel |
| 11 x U0400B2 | Joker2 400W Head w/Cable |
| 1 x L0400SE | Lamp 5600K, SE |
| 1 x B0400E2 | 400W Ballast; wDMX, ALS, Dimming, 1000Hz |
| 1 x A0400BMR2 | 400W Beamer Optical Accessory |
| 1 x C0900U | Extension cable, 25 feet |
| 1 x A0400FF | Fresnel Frosted lens with ring |
| 1 x A0400SW | Super Wide Flood lens with ring |
| 1 x A0400WF | Wide Flood lens with ring |
| 1 x A0400MF | Medium Flood lens with ring |
| 2 x A0400FD | Full Double scrim 400W - 6 5/8" |
| 1 x A0400FS | Full Single scrim 400W - 6 5/8" |
| 1 x A0400BD | Four leaf Barndoor |
| 1 x PO400FG | Frosted Glass UV protection Beaker |
| 1 x PO400CG | Clear Glass UV protection Beaker |
| 1 x A0400LB | Lens Bag 400/800 |
| 1 x A0400CCC | Carrying case 400W |
The 800W is the most popular unit of the Joker2 range, and was the first 800W HMI on the market. It's output is comparable to over 4000W of a Quartz fixture's output and produces one full stop more than our Joker2 400.
This Joker2 kit features a specular reflector and a set of four PAR lenses (Medium, Wide, Super Wide and Frosted Fresnel). Lenses provide various light patterns and a maximum output due to the reflector design and finish.
Without optics, the bare-bulb output is optimal for use in Lightbanks and lanterns due to its ability to create perfectly even distribution within accessories.
The 800W comes with a dimmable ballast, which is able to work at 300 or 1000 Hz frequencies for High Speed shoots. Drawing less than 7.5 amps on a 120V line, the 800W ballast can run on any available house power. Using the "Lumenradio" protocol, the new ballast now has an antenna and DMX panel allowing for it to be controlled via a tablet or smartphone.
At 48 lbs, the 800W is perfect for the traveling gaffer.
Head: 14" x 8" x 11" ; 9 lbs.
Ballast: 15" x 9" x 4" ; 14 lbs.
KIT: 17" x 12" x 19" ; 49 lbs.
| Head | Die Cast Aluminum |
| Ballast | Electronic square wave, flicker free AC Input; 90-265V, 50/60Hz. Convection Cooled. Hi Speed 1000Hz; Wireless DMX enabled; 7.5 Amps @ 120V |
| Lamp | 800W CSR/HMI, 5600K, Single Ended |
| Cable | 9' Head Cable; 25' Extension |
| Accessory Size | 7 3/4" |
| Lens | Medium, Wide, Super, Frosted Fresnel |
| 11 x U0800B2 | Joker2 800W Head w/Cable |
| 1 x L0800SE | Lamp 5600K, UV Stop SE |
| 1 x B0800E2 | 800W Ballast; wDMX, ALS, Dimming, 1000Hz |
| 1 x A0800BMR2 | 800W Beamer Optical Accessory |
| 1 x C0900U | Extension cable, 25 feet |
| 1 x A0800FF | Fresnel Frosted lens with ring |
| 1 x A0800SW | Super Wide Flood lens with ring |
| 1 x A0800WF | Wide Flood lens with ring |
| 1 x A0800MF | Medium Flood lens with ring |
| 2 x A0800FD | Full Double scrim 800W - 73/4" |
| 1 x A0800FS | Full Single scrim 400W - 73/4" |
| 1 x A0800BD | Four leaf Barndoor |
| 1 x PO800FG | Frosted Glass UV protection Beaker |
| 1 x PO800CG | Clear Glass UV protection Beaker |
| 1 x PMU0800BSW | Beaker Safety Wire for 800W |
| 1 x A0800LB | Lens Bag 400/800 |
| 1 x A0400CCC | Carrying case 400W |
SOONWELL Oversize Flexible LED Light SOONWELL Flexible LED Mat, once used,
Say Goodbye to any light else.
Say Goodbye to heavy light equipment!
Say Goodbye to complicated outside shooting!
Say Goodbye to old school light effects!
The innovative design is to create endless mounting options, providing cinematographers and photographers a versatile lighting system through significant improvements on the existing limitations of lighting equipment, with great advantages of Flexible Pliable Foldable Lightweight Rainproof and Minimal Heat features.
Lightweight design fit into tight-space bag makes it much easier to carry out for travel, transport or storage, even shooting in the rain.
Sizes Options: From 1*1.5ft to 4*4ft, which can be combined multi mats together to create large light wall with integrated velcro and grommets.
Color Options: Daylight color, Bi-color or RGB color.
Power Options: From 50W to 300W.
Control Mode Options: LCD touch screen, Compatible with DMX 512 or Support RC-3T 2.4G wireless remote control.
Charging Support: 15~24VDC or AC Adapter with the integrated V-mount battery plate.
Dimming: 0-100% for precise light output adjustment.
- 【Flexible & Pliable; Rollable & Lightweight Design】Easy to be shaped in any way for adjustable 360° light spread. Easy to be rolled up and fit into tight-space bag to carry, for travel, transport, storage.
- 【Powerful LED chips &High CRI】Built with powerful LED chips; LEDs have a high CRI of 95-98.
- 【Light-Wall & Channel Control Design】Multiple light mats could be joined together to build a "light wall”, you can control individual or multiple lights by setting up different or same channels in the controller;
- 【Minimum Heat & Rainproof Design】Minimum heat allows long time working; Rainproof design allows shooting in the rain;
- 【AC Power Source】Light can be powered by AC110V-240V charger..
| Model | FB-44 |
| Wattage | 600W |
| LEDs | 3696pcs |
| Color Temperature | 3000K-5600K |
| CRI | >95 |
| Operating Voltage | AC-110V-240V |
Flexible design to twist and roll the LED panel in any form.
The flexible design allows the panel to be used in a variety of shapes such as cylinders, arcs and other more. For example, if rolled in a cylinder form, the panel can be used for a 360° panorama product photography or for long thin highlights in reflective objects. When twisted in an arc form, it can be used in product photography as an effective wrap-around lighting. Just choose the desired shape to mold the panel into and use adhesive tape to secure the final form.
Bi-Color & Dimmable high CRI / TLCI SMDs.
The fixture uses 2-in-1 bi-color SMD chips with an adjustable color temperature from 3000K to 5600K, dimmable from 100%-10%, that almost reach a 180 degrees beam spread which makes this fixture great for general fill lights. The CRI is 95Ra.
- 【Flexible & Pliable; Rollable & Lightweight Design】Easy to be shaped in any way for adjustable 360° light spread. Easy to be rolled up and fit into tight-space bag to carry, for travel, transport, storage.
- 【Powerful LED chips &High CRI】Built with powerful LED chips; LEDs have a high CRI of 95-98.
- 【Light-Wall & Channel Control Design】Multiple light mats could be joined together to build a "light wall”, you can control individual or multiple lights by setting up different or same channels in the controller;
- 【Minimum Heat & Rainproof Design】Minimum heat allows long time working; Rainproof design allows shooting in the rain;
- 【TWO-WAY Power Source】Light can be powered by AC110V-240V OR SOONWELL V-mount battery.
| Model | Model |
| Power | 100W |
| CRI | 95-98 |
| CCT | 3000-5600K |
| Light Angle | >10° - 360° |
| Dimming | 0-100% |